Used Daihatsu Hijet Van for Sale
Set your destination to see the total price including shipping (C&F).
Results
Daihatsu Hijet Van Purchase Guide

The Daihatsu Hijet Van is a light commercial vehicle that has supported Japanese delivery services, agriculture, and individual businesses by combining a small body with a practical cargo space. The early models are highly scarce as classic cars, while the later models are drawing attention overseas as easy-to-maintain practical vehicles. In this article, the term "Hijet Van" is used to collectively refer to all generations of commercial vans, but the official sales name in Japan has been "Hijet Cargo" since the introduction of the 9th generation in 1999. Also, there are generations where the timing of model changes differs between trucks and vans.
First Generation Daihatsu Hijet Van (L35V/L36V and others / 1961–1966) - The earliest Hijet van with a bonnet.

The Charm of the First Generation Daihatsu Hijet Van
A rare model retaining the characteristics of early Japanese light commercial vehicles.
The first-generation Hijet started as a truck in 1960, with a light van added the following year in 1961. Its design, featuring a short bonnet at the front, significantly differs from the cab-over style of later Hijet models. While not typically chosen as a modern utility vehicle, its rounded body and simple interior exude an aura unique to Japanese commercial vehicles of the 1960s. Overseas, it is valued as a collector's car that embodies the early days of Japan's motorization.
Drawbacks of the First-Generation Daihatsu Hijet Van
Securing parts and body corrosion are the biggest challenges.
A significant amount of time has passed since its production, and very few units are available for daily use. Getting original parts such as the engine, brakes, rubber parts, and electrical components can be difficult and may require repairs or modifications of parts from other cars. Rust on the body is also something to look out for. Be sure to check the floor, under the doors, window frames, and suspension mounting points. When exporting, it's not just the cost of the vehicle that you need to factor in, but also pre-shipping maintenance and post-arrival part manufacturing.
Rival of the first generation Daihatsu Hijet Van.
Subaru Sambar Van
A comparable representative of light commercial vans from the same period is the first-generation Subaru Sambar Van. The Sambar adopted a rear-engine layout, characterized by its low floor and user-friendly cargo room. On the other hand, the first-generation Hijet Van stands out with its bonnet-type appearance, symbolizing Daihatsu's history in the four-wheel commercial vehicle market. Rather than prioritizing practicality and parts availability, it's a model to choose by considering the appearance, remaining units, and restored condition.
Specifications of the first-generation Daihatsu Hijet Van
Engine: Air-cooled 356cc inline two-cylinder two-stroke gasoline Transmission: 3-speed MT, etc. Drive system: FR Front suspension: Independent suspension Rear suspension: Rigid axle Length x Width x Height: Approximately 2,990 x 1,290 x 1,600mm (varies depending on specifications) Features: Early model equipped with a short bonnet. L35V is treated as a light van, L36V is a panel van variant.
Second Generation Daihatsu Hijet Van (S35V/S36V / 1965–1968) - A practical generation with expanded cargo space due to cab-over design.

The Charm of the Second Generation Daihatsu Hijet Van
An effective cab-over structure that utilizes a small body size
In its second generation, the driver's seat was moved to a cab-over design near the front wheels, maximizing cargo space within the limited dimensions of the compact car. The truck model was introduced in 1964, while the van was added in 1965. Compared to the first generation, it adopted a more boxy commercial vehicle style and established the basic configuration that would later lead to the HiJet. While there aren't many surviving models, it's an intriguing choice for collectors searching for early cab-over compact vans.
Cons of the second generation Daihatsu Hijet Van
Not suitable for high-speed driving or long-distance travel.
Due to its 360cc 2-stroke engine and simplistic body structure, there are considerable constraints in terms of power performance, braking force, and quietness in today's road environment. There is little room for frontal collisions, and safety does not meet the standards of modern cars. In addition to managing the engine oil and fuel system conditions, it is necessary to check the wear on the cooling system, brakes, and steering. For long-term storage vehicles, a comprehensive inspection should be performed before actual road driving, even if it is described as drivable.
Rival of the second generation Daihatsu Hijet Van
Subaru Sambar Van
The Sambar Van, characterized by its rear engine and four-wheel independent suspension, was acclaimed for its ride comfort and user-friendly cargo compartment. The HiAce Van, on the other hand, is attractive for its straightforward configuration typical of a cab-over design and its commercial vehicle-like appearance. Today, vehicle condition is more crucial than practical performance. It's essential to compare not just performance differences between models, but also the extent of rust, missing parts, registration documents, and engine start-up conditions.
Specifications of the 2nd Generation Daihatsu Hijet Van
Engine: Water-cooled 356cc inline two-cylinder two-stroke gasoline Transmission: 4-speed manual transmission Drive system: FR Suspension (front): Independent suspension Suspension (rear): Rigid axle type Length x Width x Height: Approx. 2,990 x 1,290 x 1,650mm (may vary depending on specification) Features: Adopted a cab over engine construction. Body specifications, etc. vary between S35V and S36V.
Third Generation Daihatsu Hijet Van (S37V / 1968-1972) - A 360cc generation enhanced for utility with a square body.

The allure of the third-generation Daihatsu Hijet Van
A box-style matured as a commercial van.
The third generation evolved into a more linear, box-shaped body while inheriting its predecessor's cab-over design. The side and rear openings have been made more user-friendly, increasing cargo capacity for deliveries and small-scale businesses. It features the compactness typical of the 360cc era's light van, and the appearance typical of old Japanese cars. Restored vehicles excel as exhibition units at events, promotional cars for stores, or for short-distance hobby use.
Disadvantages of the third generation Daihatsu Hijet Van
Measures against heat, noise, and age-related deterioration are required.
Due to the close proximity of the engine to the driver's seat, heat and noise easily infiltrate the vehicle's interior, making the difference with modern vans more noticeable during long drives. In older two-stroke vehicles, it's necessary to ascertain whether the amount of exhaust smoke and engine noise is an inherent characteristic of the vehicle or a sign of malfunction. Inspecting the rust on the floor and roof drip rails, the movement of the sliding doors, and the deterioration of the door hinges is also essential. It can be more challenging to secure specific exterior parts such as glass and lamps than mechanical parts.
Rival of the third-generation Daihatsu Hijet Van
Mitsubishi Minicab Van
The Mitsubishi Minicab Van of the same era was also widely used as a 360cc class cab-over type light commercial vehicle. The Minicab is characterized by its solid commercial vehicle design, and it is a close comparison to the Hijet in terms of its function. The reason for choosing the Hijet is that it provides a sense of Daihatsu's history of light commercial vehicles, and its distinctive front design. However, both models have a limited number of units remaining, so the final decision should prioritize preservation condition over model type.
Specifications of the 3rd Generation Daihatsu Hijet Van
Engine: Water-cooled 356cc inline two-cylinder two-stroke gasoline Transmission: 4-speed MT Drive type: FR Suspension (front): Independent suspension Suspension (rear): Rigid axle type Length x Width x Height: Approximately 2,990x1,290x1,650mm (may vary depending on the specifications) Features: A cab-over van that meets the 360cc standard. The box-shaped body improves the practicality of the cargo area.
4th Generation Daihatsu Hijet Van (S38V/S40V / 1972–1981) - The generation that facilitated the transition from 360cc to 550cc.

The Appeal of the Fourth Generation Daihatsu Hijet Van
Transition model with a long sales period and multiple engine displacements.
The fourth generation van was introduced in 1972 and sold as a practical light commercial van with sliding doors. The early S38V was equipped with a 360cc engine, with a 550cc S40V added after changes to the light vehicle standards. The characteristic of this generation is that it clearly shows the difference between the 360cc and 550cc era. Its distinct feature is the rounded body and small round headlamps, making it easily recognizable as a classic car.
Downsides of the 4th Generation Daihatsu Hijet Van
Even with the same appearance, there can be a significant difference in specifications.
In the S38V and S40V models, not only the engine displacement but also the vehicle dimensions and intricate mechanisms may differ. It is essential to confirm by the chassis number and registration documents, not just by appearance photos. The required maintenance knowledge and parts also differ between the older two-stroke specifications and four-stroke specifications. Especially for vehicles that have been idle for a long time, anticipate degradation in the fuel tank interior, carburetor, cooling system, and brake piping.
Rivals of the 4th-generation Daihatsu Hijet Van
Suzuki Carry Van
The Suzuki Carry Van is a representative model that competed with the Hijet in the light commercial vehicle market of its time. With its compact cab-over body and simple mechanics, it was used in a wide range of applications, including distribution and farming. While the Hijet is appealing for its user-friendly body configuration, including sliding doors, it's important to be aware of specification differences and part availability for existing vehicles. When purchasing, compare not only the engine type, but also exterior parts that are prone to becoming unavailable.
Specifications of the 4th Generation Daihatsu Hijet Van
Engine: 360cc inline 2-cylinder 2-stroke, later models include a 550cc inline 2-cylinder 4-stroke, etc. Transmission: 4-speed MT Drive System: FR Suspension (Front): Independent Suspension Suspension (Rear): Rigid Axle + Leaf Spring Length × Width × Height: Approximately 2,995 to 3,195 × 1,295 to 1,395 × 1,650 mm (varies depending on model/specification) Features: S38V features a 360cc engine, S40V adjusted to the change in regulations with a 550cc specification. This model was sold simultaneously with the 5th generation for a while.
5th Generation Daihatsu Hijet Van (S60V / 1977–1981) — Hijet 55 Wide adapted to the new compact standard.

The Appeal of the 5th Generation Daihatsu Hijet Van
Expanded body and easy-to-handle 4-stroke engine
The fifth-generation S60V debuted as the "HiJet 55 Wide", expanding its overall width to fit the 550cc standard. Compared to its predecessor, it has improved stability and interior space, enhancing its practicality as a commercial van. Employing a water-cooled 4-stroke engine makes it more manageable than older 2-stroke vehicles. This vehicle is suitable for buyers wanting to maintain a compact car body typical of older vehicles while also expecting a certain level of utility.
The drawbacks of the 5th generation Daihatsu Hijet Van.
Beware of confusion with old model cars and parts shortage.
As it was sold concurrently with some specifications of the fourth generation, it can be difficult to determine the generation by year alone. It's important to confirm that it's an S60V by the chassis number, and not to blindly trust the generation notation at the time of listing. Even if the engine itself is running, there could be age-related degradation in the carburetor, ignition system, water pump, radiator, etc. On the body, please check for rust around the floor, rear wheel arches, and sliding door rails.
Rivals of the 5th Generation Daihatsu Hijet Van
Suzuki Carry Van
The Suzuki Carry Van, which transitioned to a 550cc standard, serves as a direct comparison with the same purpose and size. Finding used parts and vehicle information for the Carry Van might be easier, but situations vary depending on the region and model. The S60V, with its unique widened proportions and rarity due to its short sales period in the history of HiAce, is appealing. If for practical purposes, prioritize parts availability; if for collection, then compare based on originality.
Specifications of the 5th Generation Daihatsu Hijet Van
Engine: AB type 547cc SOHC Inline-2 cylinder gasoline Transmission: 4-speed MT Drive system: FR Suspension (front): Double wishbone Suspension (rear): Rigid axle + Leaf spring Length x Width x Height: Approximately 3,195 x 1,395 x 1,700mm (Varies depending on roof specification) Features: Expanded vehicle width to comply with 550cc standards. Transition model sold alongside some specifications of the fourth generation.
6th Generation Daihatsu Hijet Van (S65V/S66V / 1981–1986) - The versatile generation that gave birth to 4WD and Atrai.

The Appeal of the 6th Generation Daihatsu Hijet Van
A light commercial van expanded its applications with the addition of 4WD.
In the sixth generation, in addition to the conventional rear-wheel drive, a 4WD specification was introduced, improving usability in rural areas, snowy regions, and unpaved roads. This generation also saw the derivation of the more passenger-oriented Atrai, marking a time when the uses of the Hijet series vans expanded. The S65V is primarily distinguished as 2WD, while the S66V is 4WD. With its simple mechanics and small body, it is ideal for those who want to use a classic mini van as a work vehicle or hobby car.
Drawbacks of the 6th Generation Daihatsu Hijet Van
Verification of the 4WD mechanism and condition of the old-style engine is necessary.
For 4WD vehicles, please check for abnormal noises or oil leaks from the transfer case, propeller shaft, and differential. Vehicles that have long used tires of different sizes or wear conditions may have exerted stress on the drivetrain. The early model 2-cylinder engines have little overhead for today's traffic conditions, and are not suitable for use on highways or mountain roads (3-cylinder engines have been included since 1983). Regardless of the specification, priority must be given to maintaining the cooling system and brakes for practical uses.
Rivals of the 6th Generation Daihatsu Hijet Van
Subaru Sambar Van
During the same period, the Sambar Van boasted unique strengths due to its quiet, rear-engine design and its cargo compartment structure. The HiAce was characterized by its straightforward FR and 4WD configuration, as well as its easy-to-maintain nature typical of commercial vehicles. If you plan to drive on rough terrain, prioritize the condition of the 4WD system. If you'll mainly be on paved roads, prioritize the condition of the engine and body. Since both are old mini vans, the service history and corrosion state will impact your purchasing decision more than the brand.
Specifications of the 6th Generation Daihatsu Hijet Van
Engine: AB Type 547cc Inline-2 / EB Type 547cc Inline-3 (from 1983 onwards) Transmission: 4-Speed MT, 5-Speed MT, MT with Auxiliary Transmission, etc. Drive Type: FR/Part-Time 4WD Front Suspension: MacPherson Strut Rear Suspension: Rigid Axle + Leaf Spring (Coil Spring for higher-grade later models and Atray) Dimensions (L×W×H): Approximately 3,195×1,395×1,750~1,850mm (varies by specification) Features: The S65V is mainly 2WD, the S66V is 4WD. There are also different types with expanded displacements for the export market.
Seventh Generation Daihatsu Hijet Van (S80V/S81V/S82V/S83V / 1986–1994) - The long-lived generation that transitioned from 550cc to 660cc.

The Appeal of the 7th Generation Daihatsu Hijet Van
A wide range of options available to match the model year and purpose
The seventh generation was introduced in 1986 as a 550cc car and transitioned to a 660cc engine in 1990 to match the changed light vehicle regulations. There are differences in displacement and body size between the early models S80V/S81V and the later models S82V/S83V. There are options such as 2WD and 4WD, standard roof and high roof, and it was widely used as a commercial van. The charm of the 660cc later model lies in its balance of an older appearance with comparatively practical performance.
Disadvantages of the 7th Generation Daihatsu Hijet Van
Do not treat the first and second half as the same specification.
In the case of early model 550cc cars and later model 660cc cars, the engines, body dimensions, and parts compatibility differ. Even when grouped together as "S80 series" in the listing information, please verify the model type and year of manufacture. For carburetor vehicles, the startup performance and condition of the fuel system are crucial check points while for 4WD vehicles, the presence of any abnormal noises in the drivetrain is important. Additionally, as many of these vehicles have been used for long periods for business purposes, it's not only necessary to check the mileage but also the wear of the driver's seat, deformation of the cargo floor, and sagging of the rear suspension.
Rivals of the 7th Generation Daihatsu Hijet Van
Suzuki Every
The Suzuki Every, as a contemporary light cab van, directly competed with the HiAce van. The Every offers variants such as turbo and passenger-oriented specifications, presenting a relatively diverse selection in the used car market. The HiAce is typically designed as a simple and easy-to-handle commercial vehicle, making it suitable for buyers prioritizing work purposes. When exporting, it is crucial to choose an engine specification and transmission that are easy to use locally.
Specifications of the 7th Generation Daihatsu Hijet Van
Engine: Early model 547cc inline-3, Late model 659cc inline-3 gasoline Transmission: 4-speed MT / 5-speed MT / 3-speed AT, etc. Drive system: FR / Part-time 4WD Front Suspension: MacPherson Strut Rear Suspension: Trailing link axle coil spring (3-link) Length x Width x Height: Approximately 3,195-3,295 x 1,395 x 1,750-1,900mm (Varies by year and specifications) Features: S80V/S81V mainly use 550cc, S82V/S83V mainly use 660cc. Even-numbered models are 2WD and odd-numbered ones are 4WD. The van models feature a rear suspension with coil springs for a smoother ride.
8th Generation Daihatsu Hijet Van (S100V/S110V / 1994–1999) - The final generation that perfected the traditional cab over style.

The Appeal of the 8th Generation Daihatsu Hijet Van
A compact commercial van with excellent maneuverability and cargo space efficiency.
The eighth-generation is the last HiJet Van that inherited the cab-over structure, placing the engine below the driver's seat. The S100V corresponds to 2WD, while S110V corresponds to 4WD. Multiple specifications such as standard roof, high roof, and panel van were available. Because it is small and allows efficient use of space from the front to the rear of the cargo area, it is suitable for deliveries on narrow roads and operations within facilities. Its mechanical simplicity and practicality as an old light commercial vehicle also add to its appeal.
Drawbacks of the 8th Generation Daihatsu Hijet Van
Pay attention to collision safety and heat around the engine.
The cab-over design allows for a larger cargo area, but the crumple zone in front of the driver's seat is short, so it doesn't offer as much leeway in the event of a collision as next-generation semi cab models. It also doesn't match modern cars in terms of stability and quietness at high speeds. Since the engine is located under the seats, please check for oil leaks, coolant leaks, and deterioration of the heat insulation. For vehicles that have been used with loads, it's crucial to check the condition of the rear suspension for sagging and the state of the cargo area floor.
Rival of the 8th Generation Daihatsu Hijet Van
Suzuki Every
The Every of the same period also adopted a cab-over design, prioritizing cargo efficiency and nimbleness in this light commercial van. The volume of used cars and the supply of parts can vary by region, so it's important to consider what is easily maintainable in your export destination. The simplicity of the HiAce van's structure and its commercial-grade durability are its key attractions. However, if you're seeking comfort akin to a passenger car, the Atrai and the next generation HiAce Cargo should also be considered.
Specifications of the 8th generation Daihatsu Hijet Van
Engine: EF Series 659cc Inline 3-Cylinder SOHC/DOHC Gasoline Transmission: 5-Speed MT / 3-Speed AT / 4-Speed AT (Certain Specifications After 1997) Drive Type: FR / Part-Time 4WD Front Suspension: MacPherson Strut Type Rear Suspension: Trailing Link Axle Type Coil Spring (3-link) Overall Length x Width x Height: About 3,295 x 1,395 x 1,760 to 1,855mm (Representative Specifications of the Van) Features: S100V is 2WD, S110V is 4WD. The last generation of the traditional cab-over-type Hijet Van.
9th Generation Daihatsu Hijet Cargo (S200V/S210V / 1999–2004) — A generation that enhanced safety with a semi-cab design and a new name.

The Appeal of the 9th Generation Daihatsu Hijet Cargo
New basic design improved for collision safety and ease of entry and exit
In 1999, the model was officially renamed "HiJet Cargo" as part of a model change. The semi-cab structure, which positions the front wheels ahead of the driver's seat, improved collision safety and foot space. Incidentally, the design was by ItalDesign Giugiaro. The overall length and width were expanded to meet the new compact car specifications, balancing a spacious cargo area with easy handling. If you're looking for an affordable, not-too-old compact van, this generation is still a great option today.
Shortcomings of the 9th Generation Daihatsu Hijet Cargo
Check the front wheel area and engine management.
Due to its age, there is a possibility that the engine mount, cooling system, ignition system, and oil seals may have deteriorated. For automatic transmission cars, check for gear changing shocks and slippages. For manual transmission cars, verify the wear of the clutch. Be aware of abnormal noises from around the front suspension and looseness in the steering. For vehicles used commercially, some may only clean the cargo area for sale, so be sure to check the undercarriage and maintenance history.
Rivals of the 9th Generation Daihatsu Hijet Cargo
Suzuki Every
The Every of the same period is also a semi-cab type light commercial van, designed to meet the new light vehicle standards. Both vehicles come in 2WD and 4WD, with both manual and automatic transmissions, allowing comparisons based on usage and market. The attraction of the Hijet Cargo lies in its simplicity as a commercial vehicle and its square cargo area. The Every may have readily available used parts depending on the market, but ultimately, prioritize the condition of the individual unit and the supply of parts in the export destination.
Specifications of the 9th Generation Daihatsu Hijet Cargo
Engine: EF-series 659cc inline 3-cylinder SOHC/DOHC, naturally aspirated turbo Transmission: 5-speed MT / 3-speed AT / 4-speed AT and more Drive system: FR / Part-time 4WD / Full-time 4WD Front Suspension: MacPherson strut type Rear Suspension: Trailing link axle coil spring (3-link) Length x Width x Height: 3,395×1,475×approx 1,765~1,855mm (varies depending on specifications) Features: Official name changed to Hijet Cargo. Adopted a semi-cab structure and a new light standard body.
10th Generation Daihatsu Hijet Cargo (S320V/S330V, S321V/S331V / 2004–2021) ~ A practical generation with a wide range of used car options.

The Charm of the 10th Generation Daihatsu Hijet Cargo
Abundant circulation due to long-term sales and high practicality
The tenth generation model was sold for about 17 years, making it a long-lived model with a large presence in the Japanese used car market. It can broadly be divided into the earlier S320V/S330V and the later S321V/S331V after engine changes, with a wide variety of specifications such as 2WD, 4WD, MT, AT, and turbo. The loading space is square, making it easy to load delivery boxes and tools. With relatively easy access to parts and maintenance information, this generation is an easy choice as a used light van for actual work overseas.
Downsides of the 10th Generation Daihatsu Hijet Cargo
There is a wide range in year models, and the conditions of the vehicles vary greatly.
There is a significant difference in year of manufacture between the initial and final models, making the safety features, engine, transmission, and interior vary even within the same tenth generation. Please make sure to check not only the model type but also the year of manufacture and the time of modifications. Many individual units have covered long distances in the delivery business, so the main points to check are the engine's oil consumption, the automatic transmission's shifting condition, the cooling system, air conditioning, and wear on the sliding doors. Even vehicles with low mileage that have repeatedly made short-distance deliveries tend to have numerous start-ups and longer idle time periods.
Rivals of the 10th Generation Daihatsu Hijet Cargo
Suzuki Every
The Every is the most typical comparison to the 10th generation Hijet Cargo. Both have large cargo areas and can be used for a wide range of applications, including delivery, construction, agriculture, and mobile sales. The advantage of the Hijet Cargo is that there is a wealth of second-hand models and specifications, making it easy to find a unit that meets your desired conditions. The Every also offers options including turbo specifications and passenger models. When purchasing, compare not only the reputation of the model, but also the maintenance history, rust, and cargo area damage.
Specifications of the 10th Generation Daihatsu Hijet Cargo
Engine: Early EF Series, Late KF Series 659cc Inline 3-Cylinder Gasoline, Naturally Aspirated/Turbo Transmission: 5-Speed MT / 3-Speed AT / 4-Speed AT Drive System: FR / 4WD Front Suspension: MacPherson Strut-Type Coil Spring Rear Suspension: Trailing Link Axle Type Coil Spring (3-Link) Length x Width x Height: 3,395 x 1,475 x approx 1,765~1,890mm (varies with roof specifications) Features: S320V/S330V mainly in the early period, S321V/S331V after the adoption of the KF engine. Options for 2WD and 4WD, naturally aspirated and turbocharged versions are available.
11th Generation Daihatsu Hijet Cargo (S700V/S710V / 2021–) - The current generation incorporating CVT and the latest safety equipment.

The Appeal of the 11th Generation Daihatsu Hijet Cargo
Significantly improved cargo space usability and daily performance.
The 11th generation debuted in 2021, adopting a new platform for commercial vehicles. It features a square space with minimal side-wall undulations in the cargo area and a wide opening, making it easier to load box-shaped and long items. The new generation primarily features a continuously variable transmission (CVT) replacing the conventional automatic transmission (AT), ensuring smooth city driving and fuel efficiency. It also includes a grade with safety features, making it suitable for buyers who intend to use it for daily deliveries or long-term ownership. Moreover, the 4WD system adopted from the 11th generation has evolved into an "electronically controlled 4WD" system, the first of its kind in light commercial vehicles. This system allows for switching between "2WD", "4WD AUTO" (automatically distributes torque to front and rear wheels according to road conditions) and "4WD LOCK" (for muddy and rough roads) with just one switch. This feature is extremely practical and a valuable selling point for buyers driving in snowy locations abroad or on unpaved roads.
Drawbacks of the 11th Generation Daihatsu Hijet Cargo
Ensuring a proper repair environment for electronic equipment and verifying specifications are crucial.
Being relatively new high-year models, the used car prices tend to be higher than the 10th generation. Also, there is an increase in electronic equipment such as CVT, driving assistance devices, cameras, and sensors, so it is necessary to check in advance whether they can be diagnosed and repaired at the destination abroad. For accident-repaired vehicles, not only the body panels but also the installation conditions of the sensors and the warning lights need to be checked. Presence of 4WD, turbo and MT varies depending on the grade, so it is necessary to match the necessary specifications for the use with the chassis number and equipment table.
Rivals of the 11th generation Daihatsu Hijet Cargo
Suzuki Every
A typical comparison in its class is with the Suzuki Every. The Every boasts a design for a kei-cargo van that has been refined over many years, as well as extensive sales records, and like the Hijet Cargo, it is widely used for deliveries and tasks. The charm of the Hijet Cargo lies in its well-arranged design that takes advantage of the wall surfaces of the cargo area and the smoothness of its CVT. On the other hand, depending on the region of purchase, it may be easier to secure parts and maintenance bases for the Every. Please compare, including the maintenance environment after export.
Specifications for the 11th Generation Daihatsu Hijet Cargo
Engine: KF Type 658cc in-line 3-cylinder gasoline, Natural Aspiration & Turbo Transmission: CVT/5-speed MT Drive System: FR/4WD Suspension (front): MacPherson Strut Coil Spring Suspension (rear): Trailing Link Axle Coil Spring (3-link) Overall length x width x height: 3,395 x 1,475 x 1,890mm Features: The S700V is 2WD, the S710V is 4WD. Equipped with CVT, a new platform, and preventive safety features.